Delta Dynapath Manual
Does anyone have an operations manual and programming manual for a Tree Journeyman 325 CNC Mill with Dynapath System 10 control? If yes, please PM me. I just had mine delivered last week and it would be great to acquire the manuals. Dynapath does not support system 10 anymore so I don't think they have the programming manual. It's hard to believe that I started my machining addiction just over a year ago with the purchase of an old Southbend 9A lathe that I rebuilt. This Tree J325 is very stout! Have to clean it up a bit as it is full of a sticky film of coolant and aluminum chips/dust all around.
Then hook up power and start some troubleshooting. Here are some pics.
Russ Hanscom wrote:Autocon has a manual called the Customer Information Manual, CIM for short, that covers the Delta 20, 30, and 40 programming. I bought new copy a few years ago for about $200. Might cover the series 10 too?
I also have a series 10 that I bought for parts, it came with some paper but I do not recall if a manual was in the pile. It would be great if you can check the pile of papers to see if you have the programming manual.
I did receive the schematic drawings with the machine and a multiple page document titled 'Discussion of Block Diagram', but that's it. I really need a dynapath programming manual and the Tree Journeyman 325 CNC manual. I'll look into Autocon. I thought they were the same company as Dynapath.
Dynapath Delta 10 Manual
Russ Hanscom wrote:Ok, I do have a CIM for the Delta 10; a three ring binder full, looks like an original but I have no way of knowing if all the pages are there. I bought a complete Delta 10 system off Ebay a few years ago because I wanted a spare power supply and driver boards for my Delta 40 system and they are the same, the rest of the bits just came along for the ride. Beyond the CIM, are you interested in any other Delta 10 stuff? Basic home wiring guide. At the moment I'm only intersted in the CIM. Fortunately, the previous owner included a spare system 10 controller, power supply, boards, CRT assembly. I think that it is a complete unit.
Delta Dynapath
I have power hooked up now, so I'm going to start trouble shooting. The CRT does not come up, and it looks like I have a couple of fans out on the power supply housing where the control cards are located. I'll let you know if I end up needing any parts.